Dixie Plywood & Lumber Company of Miami
Stocking Inventory for Drawer Components
We stock a full range of drawer components to fill your drawer
box needs. Whether you're making high-end furniture or economy
cabinetry, we have the drawer component materials you need to
finish your job with style.
Pre-finished Maple Drawer Components from States Industries
(manufacturer of Appleply®). For the discriminating cabinetmaker
or furniture manufacturer who wants to finish the job off in
style by putting in maple drawers, this product is the way to
go! States uses Maple plywood for both the drawer sides and
the bottoms. The drawer sides are 1/2" thick and are edgebanded
on the top edge and grooved for a 1/4" bottom. Both the drawer
bottoms and drawer sides are then finished with an extremely
hard clear acrylic.
Pre-finished Maple Drawer Side stock sizes;
- 4" x 96"
- 6" x 96"
- 8" x 96"
- 10" x 96"
- 12" x 96" (this size comes with 2 long edges edgebanded
and no groove, for making custom sizes)
Pre-finished Maple Drawer Bottoms
Printed Drawer Components. We stock 3 types
of Oak Print Drawer Sides manufactured by Alabama Interforest
to fit your quality and budget needs. The drawer sides are made
from 7/16"A grade MDF, finished 2 sides, grooved, bullnosed,
and finished on the top edge. Drawer Bottoms are made of 1/8"
Hardboard.
Golden Oak Drawer Components. The surface
is base coated, an oak print is applied followed by a low gloss
top coat. The top edge of the drawer sides are finished with
an oak print foil that matches the sides perfectly. These are
the Cadillac of printed drawer sides and bottoms.
Drawer Sides; (all are 7/16" thick)
- 4 1/8"x 109"
- 5 1/8" x 109"
- 11 7/8" x 109" (these have two long edges finished and
no groove, for making custom sizes)
Drawer Bottoms;
Dixie Oak Drawer Components. The surface
is base coated and oak print is applied. The top edge of the
drawersides are finished with an oak print.
Drawer Sides (all are 7/16" thick)
- 4 1/8"x 109"
- 5 1/8" x 109"
- 11 7/8" x 109" (these have two long edges finished and
no groove, for making custom sizes)
Drawer Bottoms
Savannah Oak Components. Oak direct
print is applied and the top edge of the drawer sides are finished
with an oak print that matches the sides.
Drawer Sides; (all are 7/16" thick)
- 4 1/8"x 109"
- 5 1/8" x 109"
- 11 7/8" x 109" (these have two long edges finished and
no groove, for making custom sizes)
Drawer Bottoms
If you would like more information or pricing please call us
at (305) 694-1006, send us a fax at (305) 694-1701 or send us
an e-mail.
>> Return to Stocking Inventory
on the Miami Page
|
